South Central Simplex Net Tonight
Don’t forget about the South Central Simplex Net (SCSN) tonight. The SCSN is held every Wednesday at 19:00L (7:00 PM), local Alaska time. The purpose of the Net is to...
Category: ARES
-
-
DireWolf Software TNC – Call for Assistance
Hi all. We are working on a very important emergency communication project and have reached a bit of a stumbling block trying to get Direwolf to work as a software...
-
AREDN Mesh Node Flashing Clinic Follow-up
Due to snowpocolypse, I needed to delay the AREDN Mesh Node Flashing Clinic until tomorrow, Sunday, November 12 at 11:00 Alaska time. I’ll demonstrate flashing a Mikrotik node and a...
-
AREDN Mesh Node Flashing Clinic
We have acquired several pieces of Mikrotik 5 GHz gear we need to configure to use on our Anchorage AREDN Mesh network. “Flashing” these units to install the AREDN firmware...
-
FCC Extends Public Comment Period on 60-Meter Band Proposal
The FCC has extended the public comment period on the 60-meter band proposal until 11/28/2023. Please submit your comments! Click here to link to our previous post on the topic....
-
Calling All Amateurs – 60 Meters – PLEASE TAKE ACTION
Please see the following from ARRL Northwestern Division Director Mike Ritz, W7VO regarding the important need for all amateurs to make comments on the FCCs Notice of Proposed Rulemaking (NPRM)...
-
Be ready with the info….
By: Kent Petty, KL5T 9/13/2022 When bad things happen… So, we all want to be prepared for the day that bad things happen. In Alaska, and specifically, here in South...
-
Direwolf Experts?
Posted by: Kent Petty, KL5T 9/13/2022 We are working on a very important emergency communication (EMCOMM) project that will involve an implementation of the Direwolf virtual TNC software. If you...
-
Winlink Setting for the Kenwood TH-D72A Radio
From the capable hands of KL7TS…. We (i.e. the Anchorage Amateur Radio Club) recommend using the Santa Clara County ARES (SCCA) settings for all radios on our network, for the...
-
UPDATE – Call For Expertise/Assistance – Linux/Raspberry Pi
Update posted by: Kent Petty, KL5T Date 2/11/2022 Thanks to help from Eugen (KL3RR) and Mike (KL3HY) this afternoon we solved the issue with a very important addition we’ve been...