HF Radio Assistance Please – Icom IC-7600 and SGC SG2000
We’ve got a couple HF rigs we’re trying to get configured at the RSOC and really need some help. If you are an owner of an Icom IC-7600 or SGC...
Operator and Sponsor of the Radio Science and Operations Center (RSOC)
We’ve got a couple HF rigs we’re trying to get configured at the RSOC and really need some help. If you are an owner of an Icom IC-7600 or SGC...
At the Radio Science & Operations Center (RSOC) we have the SteppIR Mark IV vertical installed and working, using temporary Field Day ground radials. One of the grounding blocks had...
Hams in the Anchorage, Mat-Su Valley, and Kenai Peninsula areas participated in the 2018 Great Alaska ShakeOut Earthquake Drill on October 18. At the appointed time, 10:18 a.m., from the...
The Anchorage Area ARES group and Anchorage Amateur Radio Club ask for your participation in the The Great Alaska ShakeOut “Earthquake Drill”, tomorrow, October 18, 2018 at 10:18 a.m. We...
On the afternoon of October 10, a transmitter keyed up on 147.93 MHz. This happens to be the input frequency for club’s Grubstake VHF repeater (147.33/93). As a result, the...
The following is a slightly edited version of an article published in the AARC September 2018 Newsletter. It was time, the AARC has received so many battery donations over...
Saturday was a busy, busy day at the RSOC. A dandy crew of folks got together to tune up our AB-105 tower with a proper accoutrement of antennas, from 20...
A major upgrade to the RSOC antenna system is planned for this Saturday. It will include stripping a gang of old FCC leftover antennas from the tower mast, as well...
NOTE: Please see below. We had some problems with the form attached to this previous post, so I you submitted the form, we probably didn’t get it. We’re taking a different...
There’s a great opportunity for our Raspberry Pi enthusiasts to take on an important and interesting project for the club. If successful, it might be something that many of our...